ADVANCED MENU
~
29
~
7.2 System Info
In this menu list, you can check or change some system settings.
Move the cursor to “
” (SYSTEM INFO) icon, you will see a similar screen as the following:
SYSTEM INFO
SERIAL TYPE
RS485
BAUD RATE
2400
HOST ID
0
PASSWORD XXXX
RESET DEFAULT
RESET
CLEAR HDD
HDD-MASTER-1
UPGRADE START
AUTO KEYLOCK (SEC)
30
LANGUAGE ENGLISH
VIDEO FORMAT
NTSC
VERSION 1049-1007-1011-1001-L6-6C1B
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
uv
SELECT
s
BACK
t
NEXT
ENTER
The submenu items are described below:
1) SERIAL
TYPE
Here shows the serial type of the DVR (RS-485).
2) BAUD
RATE
Set the baud rate of the DVR (2400 / 9600 / 19200 / 38400 / 57600).
3) HOST
ID
Set the ID of the DVR (0 ~ 254).
4) PASSWORD
Reset the password for accessing the DVR system. You can set the 4-digit password.
5) RESET
DEFAULT
Press
(enter) button to reset all settings as default, and select “YES” to confirm or “NO” to cancel.
6) CLEAR
HDD
Select the HDD you want to clear. Press
(enter) button and select “YES” to confirm to clear HDD or “NO” to cancel.
7) UPGRADE (For upgrading firmware / OSD)
Before using the USB flash drive, please use your PC to format the USB flash drive as FAT32 format first. Then,
save the upgrade file in a compatible USB flash drive, and insert it into the USB port at the front panel.
Press
(enter) button and select “YES” to confirm upgrade or “NO” to cancel.
Note:
For the list of compatible USB flash drives, please refer to “APPENDIX 2 COMPATIBLE USB FLASH
DRIVE BRAND” at page 65.
8) AUTO
KEYLOCK
Set the time-out in second after which the key lock function is activated (Never / 10 / 30 / 60).
9) LANGUAGE (Multilingual OSD)
Select the language of the OSD.
10) VIDEO FORMAT
Here shows the information of the DVR video system (NTSC / PAL).