![background image](http://html.mh-extra.com/html/idtronic/bluebox-panel-reader-hf-nfc/bluebox-panel-reader-hf-nfc_manual_618906018.webp)
BLUEBOX Panel Reader
Page 18 of 36
Respect the notes on installation in the event that several RFID
13.56 MHz devices are operating simultaneously in the same area.
4.4
Mechanical Design
1.
Sensing face (antenna)
2.
Fixing bracket
4.5
Fixing
To correctly install the device, perform the following steps:
•
Drill a Ø22 mm hole in the panel; remember that the panel must have a
thickness between 2.5 and 4 mm, if shorter it is necessary to shim with
appropriate washers placed between the panel itself and the fixing support
of the device.
•
Mount the antenna on the front of the panel by arranging the device fixing
support and the ring on the back of the panel.
•
Before tightening the ring nut, correctly align the fixing bracket of the
device so as to match the antenna strip connection to the device.
•
Fasten the device on the support using 2 M3x6 screws (supplied) after
correctly and gently coupling with the antenna.
•
Wire the device.