BLUEBOX Panel Reader
Page 12 of 36
Parameter
Description
Range
Default
End of
Message
The end character added to the message.
Note that this parameter become effective
only after a reboot of the reader.
NUL
CR
TAB
NUL
Start of Text
The start text character added to the message.
Note that this parameter become effective
only after a reboot of the reader.
See
description
NUL
End of Text
The end text character added to the message.
Note that this parameter become effective
only after a reboot of the reader.
See
description
NUL
Content Data
Encoding
The message content data encoding.
Note that this setting is not effective if the
spontaneous message content data encoding
setting and/or manipulation settings are different
from the default values.
Note that this parameter become effective
only after a reboot of the reader.
None
UID only
Decimal D-10
Decimal D-18
None
Message Index
The start position index in the message to remove
leading characters from the message (0 means no
leading characters remove)
Note that this parameter become effective
only after a reboot of the reader.
0 … 255
0
Max Message
Length
The max length of the message (0 means all the
message starting from the index to the end of
message).
Note that this parameter become effective
only after a reboot of the reader.
0 … 255
0
The keyboard emulation parameters are stored in configuration page nr. 0x06
and
are managed through the ‘Read RAM/ROM Configuration Parameters’ and
‘Write RAM/ROM Configuration Parameters’ commands as described in protocol
technical manuals where the parameters 1…7 fields and default values are:
1
2
3
4
5
6
7
Intrachar
Time
End of
Message
Content
Data
Encoding
Start of
Text
End of
Text
Message
Index
Max
Message
Length
0x02
0x00
0x00
0x00
0x00
0x00
0x00
Where:
