Table of Contents
Section 1. Introduction
Description
1
Section 2. Installation
Host Connections
2
Section 3. Configuration
Setup Commands Structure
3
Communication Protocol
4
Communication Timing
5
Default Settings
6
General Selections
6
Message Formatting Selections
9
Magnetic Track Selections
10
Communication Parameter
Selections
12
Output Format Selection
14
Section 4. Data Editing
Functions
16
Fields
17
Formulas
18
Data Editing Setup Commands
19
Section 5. Operation
Operating Procedure
24
Section 6. Troubleshooting
General Procedures
25
Appendix A. Default Settings
Default Settings
26
Appendix B. Function Codes
Function Code Table
28
Appendix C. Non-Printable ASCII Characters
ASCII Characters Table
29
Appendix D. Magnetic Stripe Standard Data Formats
ISO Credit Card
30
California Driver’s License
31
AAMVA Driver’s License
33
Appendix E. MiniMag Configuration Utility
Operation
35
Commands
36
Appendix F. Pin Out Information
DB-9 Female Connector
40
Agency Approved
Specifications for subpart B of part 15 of FCC rule for a Class A
computing device.
Limited Warranty
ID TECH warrants this product to be in good working order for a
period of two years from the date of purchase. If this product is not in
good working order as warranted above, or should this product fail to
be in good working order at any time during the warranty period,
repair or replacement shall be provided by ID TECH.
This warranty does not cover incidental or consequential damages
incurred by consumer misuse, or modification of said product. For
limited warranty service during the warranty period, please contact
ID TECH to obtain an RMA number and instructions for returning
the product.
©2004 ID Technologies, Inc. The information contained herein is
provided to the user as a convenience. While every effort has been
made to ensure accuracy, ID TECH is not responsible for damages
that might occur because of errors or omissions, including any loss of
profit or other commercial damage. The specifications described
herein were current at the time of publication, but are subject to
change at any time without prior notice.
ID TECH is a registered trademark of ID Technologies, Inc.
MiniMag and Value through Innovation are trademarks of ID
Technologies, Inc.
