Send Sequence
Sends out the field in a user-defined order.
Data Edit Setting
<STX><S><1Bh><01h>< Data Edit Setting><ETX><CheckSum>
<Data Edit Setting>:
“0”
Disable data edit.
“1”
Enable data edit, do not send data that does not
match the data edit formulas.
“3”
Enable data edit, send data that does not match the
data edit formulas “as is.”
Data Edit Added Field Setting
<STX><S><FAh><Len>< Added Field><ETX><CheckSum>
Where:
<Added Field> is [string1] ... [stringn], n <= 6
stringn = {string_len}{string}, string_len <= 6
{string} is always six bytes. If a string is less than six characters
long, you must pad the end with hex 0 (ASCII: Null).
Data Edit Send Command Setting
<STX><S><FCh><Len>< Send_Command><ETX><CheckSum>
Where:
<Send_Command> is [ccsmd] [dmvsmd][aamvasmd] [flexsmd]
ccsmd = {field_len}{Hex E0}{field}[{field}...,] {Hex FF} default is
{Hex 00}{Hex FF}
Data Editing Setup Commands
The following commands are used to set the operating parameters of
the Data Editing feature. These commands are designed for maxi-
mum flexibility, but some of the details can be complicated. We
therefore suggest that the MiniMag Configuration Utility be used to
set these commands.
Added Field
An output field is created containing the character string. Up to six
fields can be defined. The maximum number of characters for each
field is six.
Search Method
In working with a user-defined format that is not credit card, CA
DMV, or AAMVA, the MiniMag will support any combination of the
following five search methods:
Length Match: For a particular track, indicate the minimum and
maximum number of characters acceptable for the data editing
formula.
String Match: For a particular track, indicate a specific string of
characters, as well as the character position at which that string
must begin, in order to be acceptable to the data editing formula.
Search Before: For a particular track, the MiniMag will create a
data field which contains all characters that come before the speci-
fied occurrence of a given character sequence. (For example, the
second occurrence of the character sequence ABC.)
Search Between: For a particular track, the MiniMag will create a
data field which contains all characters that come between the
specified occurrence of one sequence of characters and another.
Search After: For a particular track, the MiniMag will create a data
field that contains the specified number of characters that come
after the specified occurrence of a given character sequence. (An
offset of a given number of character positions can also be indi-
cated.)
19
20
