IDT ADC1410S Series, Quick Start Manual

Page: 17 / 27

Integrated Device Technology
Quick start ADC1410S, ADC1210S, ADC1010S series
Quick start
© IDT 2012. All rights reserved.
Quick start Rev. 06
— 2 July 2012
17 of 27
Column 1 Column 2
20 0e
21 00
22 00
Note that all data are saved in hexadecimal format.
Clic
k on the “Save registers read to file” button to select the file to store data to. Make
sure that you store your file with “.txt” extension, this will allow you to re-use the file on
the “ADC - Load Registers” page.
3.2.3 ADC SPI programming Load Registers page
This page allows downloading configuration data to the device registers:
Fig 11.
SW_ADC_1_r02: “ADC - Load Registers” page
It is not necessary to have a file that has the whole set of registers listed. The only
restriction is regarding the formatting of the file as given in
section 3.3.2 .
Note: this page can not be used to download data saved during the comparison process.
To download settings onto device registers, follow the procedure below:

Browse to select your file (button

);

Click on “Load data” button 
.
A message on field

and a progress bar will inform about the status of the operation
until message “download done!” is seen. The table 
is updated with the current
values downloaded at the fly as can be seen on figure 13 .



