IDS 816, Installer Manual

Page: 31 / 64

IDS 816 700-283-02I Issued September 2009
31
NOTE:
When connecting any device with a high current requirement to a programmable output a suitable relay
must be used. DO NOT connect such devices directly to the programmable outputs as this may damage
the output circuitry.
LOCATIONS 70-87 Event Driven Programmable Outputs
Table 7 : Event Driven Programmable Outputs
Loc. Event Output Default Action
70 AC fail programmable output Disabled
71 AC restore programmable output Disabled
72 Low battery programmable output Disabled
73 Battery restore programmable output Disabled
74 Auto test programmable output Disabled
75 Download programmable output Disabled
76 Siren trouble programmable output Disabled
77 Aux 12V trouble programmable output Disabled
78 Keypad fuse programmable output Disabled
79 485 device tamper programmable output Disabled
80 485 bus failure programmable output Disabled
81 Box tamper programmable output Disabled
82 Dedicated panic programmable output 1 Pulse high [2]
83 Communication fail programmable output Disabled
84 Phone line tamper programmable output Disabled
85 Phone line restore programmable output Disabled
86 RF jamming programmable output Disabled
87
RF jamming restore programmable
output
Disabled
LOCATIONS 95 – 96 Function Driven Programmable Outputs
Table 8 : Function Driven Programmable Outputs
Summary of System function Driven Programmable outputs
Loc. Function Output
95 Fire sensor power programmable output Disabled
96 Dual reporting programmable output Disabled