IDS 400, User Manual, Page: 17 / 28

IDS400 USER MANUAL NO. 700-204-01A ISSUED NOV 2000 VER 1.01 17
IDS400 USER MANUAL
keypad audible indicator sounds.
L
A
PANIC ALARM
can also be activated by any
FIXED PANIC
or
REMOTE PANIC
buttons which have been installed.
L
If audible panic option has been selected, the siren will sound,
and the
PANIC REPORTING CODE
will be transmitted to the
monitoring company.
L
To silence the siren, enter a valid 4 digit [
USER CODE
]. If the siren
is not cancelled, it will stop automatically after the programmed
SIREN TIME OUT period.
L
Ensure that your installer has enabled this function if it is
required.
L
Press this key only in an emergency situation that requires
response by emergency personnel.
8.4 Duress Code
[#] + [DURESS CODE]
L
This is a special 4 digit user code which should only used in the
unique situation where an intruder forces one to disarm the
system “under duress”.
L
When the [
DURESS CODE
] is entered, the control panel disarms
normally - however a
DURESS REPORTING CODE
is trans-
mitted to the monitoring company to inform them that you have
been forced to disarm the control panel by an intruder.
L
It is advisable to choose a code that can be easily remembered
by all family (or staff) members.
9.0 Emergency Evacuation Plan
An emergency evacuation plan should be established in case of a fire:
L
Draw up a floor plan of your premises showing windows, doors,
stairs and rooftops that can be used for escape.
L
Indicate a suitable escape route for each room; and always
keep these routes free of obstruction.
L
Set a meeting place outdoors for a headcount of the building
occupants.
L
Practice escape procedures.