IDS 400, User Manual, Page: 15 / 28

IDS400 USER MANUAL NO. 700-204-01A ISSUED NOV 2000 VER 1.01 15
IDS400 USER MANUAL
6.2 To Un-Bypass Zone
[
-
] + [ZONE NUMBER]
1. Press the [
-
] key.
2. Press the number corresponding to the currently bypassed zone
3. The zone indicator will extinguish - the zone is now active.
7. Disarming the System
[#] + [USER CODE]
To disarm the system, enter a valid [
USER CODE
] before the expiry of
the entry delay. Although not essential, it is recommended that the [#]
key be pressed before entering a user code as this clears any
unintended key entries.
L
Enter the premises through a designated entry/exit door; enter-
ing by any other door will sound an immediate alarm.
L
As soon as the entry/exit zone is violated i.e. the door has been
opened, the entry delay begins.
L
The audible indicator will sound for the duration of the entry
period to indicate that a valid user code is required.
L
If the ARMED indicator remains illuminated, an error was made
while entering the user code, press the [#] key and re-enter the
code.
L
Once the system disarms, the
ARMED
indicator will extinguish
and the audible indicator will stop sounding.
L
If no valid user code has been entered by the end of the entry
delay period, an alarm condition will be registered.
L
If the entry period is too short, have your installer change the
entry delay period.
NOTE:
If the
ARMED
indicator is flashing upon entry, there has been a
violation. The intruder may still be inside! Call for assistance.
NOTE
:
Enter a valid [ USER CODE ] to cancel the strobe (Where one has been
installed.