English
21
e.
Clean the tips of the sensors with descaling product, removing all limescale residue.
f.
If the sensors have rust on the tips, remove with sandpaper.
g.
Replace the sensors, making sure to tighten the nuts with 20Nm torque.
h.
Replace the connectors on the sensors, making sure the
black connector corresponds to the top sensor
and
the red connector to the bottom sensor
. (fig.12)
i.
Replace the protective cover and replace the placeholder screw 12 (fig.09)
14.
MAINTENANCE FOR STEAM – CLEANING THE WATER FILTERS
The manufacturer is not responsible for any malfunctioning caused by dirty filters that have not been
serviced/cleaned following the maintenance plan in section 11.
Figure 09
Figure 13
The water filters are essential for the protection of the water pump. It is fundamental that the filter block
sediments and impurities, guaranteeing that the pump function with clean water.
ASTRA STEAMER EVO contains two water filters:
1. Water pump filter 17
(fig.13)
2. Solenoid valve filter (
Y) 18 (fig.13)
11.1 CLEANING THE PUMP FILTER
a.
Toggle off all switches and unplug ASTRA STEAMER EVO. After the machine has cooled down remove
the protective cover by removing the placeholder screw 12 (fig.09).
b.
Unscrew the transparent “cup” 17 (fig.13)
c.
Remove the mesh component and remove all dirt and impurities with running water and a pressurized
air cleaner.
d.
Reassemble the parts.
17
18
12
Summary of Contents for Astra Steamer Hybrid
Page 2: ......
Page 29: ...English 27 19 WIRING DIAGRAM...
