41
4. Utilities
4.1. Card Printer Config
SOLID-510 is produced with optimized setting. You need to adjust setting value if
required or spare parts are replaced using CardPrinterConfig in our Installation CD.
You can adjust following settings with CardPrinterConfig.
(1) Run CardPrinterConfig
Password input window is displayed when
you run this program. If you input the
correct password, the recorded setup value
will be shown and you can change values.
The password is saved to SOLID-510
printer. So if you use another PC with same
printer, previous password is required to
run this program.
(Default password is
none. Please press OK if you have not set
password.)
Figure 62 CardPrinterConfig Log-in
When you are successful to log-in, you can
set values shown as left picture.
Figure 63 CardPrinterConfig start
