BX2 Systems User’s Handbook
Device pin assignments
Chapter 1. Working with BX2 System Hardware
25
ATX power supply
Turn off the power supply and unplug the power cord of the
ATX power supply before you connect the power supply to the
ATX Power connector.
The mainboard requires a power supply of at least 200 Watts and a
"power good" signal. Make sure the ATX power supply can support a
minimum load of 720 mA on the 5V Standby lead (5VSB).
If you use the Wake-On-LAN (WOL) function, make sure the ATX
power supply can support at least 720 mAmp on the 5V Standby lead
(5VSB).
Warning
ATX Power
Summary of Contents for BX2
Page 1: ......
Page 66: ...BX2 Systems User s Handbook 66...