Front panel connections
BX2 Systems User’s Handbook
16
Chapter 1. Working with BX2 System Hardware
Power LED and keylock
Plug the power LED cable into the 5-pin keylock connector.
Some systems feature a keylock function with a front panel switch for
enabling or disabling the keyboard. Connect the keylock switch to the
5-pin keylock connector on the mainboard.
Reset
When the Reset cable is connected, pushing the Reset button on the
front panel causes the system to restart the boot-up sequence.
Plug the Reset push-button cable into the 2-pin Reset connector on the
mainboard.
Turbo LED
Connecting the 2-pin turbo LED cable to the corresponding Turbo
LED connector causes the LED to light when the system is in Turbo
mode. (The manufacturer has permanently set this mainboard to
Turbo mode.)
IDE LED
When the IDE LED cable is connected, the LED lights when an IDE
device (a hard disk drive or a CD-ROM) is active.
Connect the 2-pin IDE device LED cable to the corresponding IDE
LED connector on the mainboard.
Pin assignments
Device
Pins
keylock
4, 5
power LED
1, 3
Summary of Contents for BX2
Page 1: ......
Page 66: ...BX2 Systems User s Handbook 66...
