Installing IDE devices (HDD, CD-ROM)
BX2 Systems User’s Handbook
20
Chapter 1. Working with BX2 System Hardware
Installing DIMMs
1.
Locate the DIMM slots on the mainboard. (See page 12.)
2.
Use both hands to press the DIMM straight down into the DIMM
socket.
When the DIMM is properly seated, the clips of the socket snap in
place to hold the DIMM on either side.
Removing DIMMs
Gently press down both clips on each side of the DIMM to remove the
DIMM.
Installing IDE devices (HDD, CD-ROM)
The mainboard offers two primary and secondary IDE device
connectors (IDE1, IDE2.) It can support up to four high-speed hard
disk drives or CD-ROM drives.
Connect one end of the 40-pin flat cable to the IDE device (HDD or
CD-ROM). Connect the other end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the mainboard. (See
page 12.)
Summary of Contents for BX2
Page 1: ......
Page 66: ...BX2 Systems User s Handbook 66...