IDK MSD-72 Series User Manual Download Page 32

Page: 32 / 150

MSD-72 Series User’s Guide

IN 1

DI SPLAY

POWER

IN 2

8.4 Menu operation

You can register the control command to turn on/off the sink device. Press the key to send the control

command to the sink device.

【

See: 9.12.3 Command link

】

[Table 8.4] Sink device power supply key

[Figure 8.4] Sink device power supply key

Note:

If power a ON/OFF control command is sent to a sink device and reply command of normal termination is sent

from the sink device, the “DISPLAY POWER” key turns orange (when powered ON) or the key light turns off

(when powered OFF)

If the reply command from the sink device is not checked, the actual power status of the sink device and the

LED may not match.

8.5 Command control

Executing control commands which are registered and linked to external command keys (COMMAND A to

COMMAND I). No commands are registered as Factory default setting. Register and link commands to

external command keys.

【

See: 9.12.3 Command link

】

Sink device power status

LED

Power ON

Lights (orange)

Power OFF

Turned off

Summary of Contents for MSD-72 Series























































































































































Search results

Summary of Contents for MSD-72 Series

Reviews:

Related manuals for MSD-72 Series

Brands by name

Popular brands

IDK MSD-72 Series, User Manual

Search results

Summary of Contents for MSD-72 Series

Reviews:

Related manuals for MSD-72 Series

Brands by name

Popular brands