MSD-72 Series User’s Guide
143
Analog input video is
not output.
[3] Change the input signal type.
Video is not output
[4] If the source device has multiple output connectors, check the
video output settings of the source device.
－
Video is
disappeared,
interrupted, or has
noise.
[5] If using a long cable for input or output, replace it with a 5
m/16.4 ft. or shorter cable. Since the MSD has the equalizing
function, long cables can be connected, but the MSD may not
provide its full performance depending on the cable quality and
the connected device. If the problem is solved by replacing the
cable, signal may have been degraded due to the long haul
transmission. We have high-quality cables, cable boosters and
extenders. Please contact us as needed.
－
[6] When high-speed signal (high resolution: such as UXGA,
WUXGA, QWXGA, WQHD, WQXGA, 1080p, 4K; DEEP
COLOR signal) is input or output, video may not be displayed
or noise may appear depending on the cable quality and the
connected device. If the problem occurs only when a specific
input is selected, the problem was caused by the input side. If it
occurs for all inputs or only when a test pattern is displayed,
the problem was caused by the output side. Change the
resolution to a lower level and/or disable Deep color. You can
check the resolution and color depth of the input signal in
”
and you can also limit
resolution and color depth of input signal according to the EDID
setting.
You can specify the output resolution and check the color
depth of the output signal in “
”
and you can also limit the output signal color depth.
Input video and test
pattern are not
output.
[7] If you set the output resolution other than “AUTO”, check if the
selected resolution is supported by the sink device.
If you select 480i, 576i, or 1080i, video may not be output to
sink devices that do not support interlaced signal.
For TV output resolutions (480i to 4K (4096 x 2160)), check the
vertical synchronous frequency. PC output resolutions (VGA to
WQXGA) may not be output to LCD TVs.
Video is interrupted.
If you set “
9.5.4 Automatic detection of input video intertuption
to “ON”, false detection may occur. Change the setting to
“OFF”.
Video from
HDMI/DVI output is
interrupted or has
noise.
If the problem occurs in all input channels or when a test pattern is
displayed, replace the cable with a shorter one.
Video from analog
input is displayed in
black-and-white or
green.
Change the input signal type.
VHS reproduction or
fast-forward is
interrupted when
Automatic detection of input signal failed. Set the input signal type
manually to “VIDEO AUTO”, “VIDEO”, or “Y/C”.