IDK IMP-400UHD, User Manual

Page: 67 / 99

IMP-400UHD User Guide
67
8.7.2 Deep Color
Menu EDID
→
DEEP COLOR INPUT
Setting value 24-BIT COLOR: 24 bit/pixel (8 bit/component) [Default]
30-BIT COLOR: 30 bit/pixel (10 bit/component)
36-BIT COLOR: 36 bit/pixel (12 bit/component)
Communication Command
@GDI / @SDI Deep Color input
You can set the Deep Color (Color depth) that is output from the source device.
This setting is enabled if a resolution other than “EXTERNAL” or “Copied EDID” is selected in
“ 8.7.1 EDID resolution ”.
Note:
・
If you select “30 bit/pixel (10 bit/component)” or “36 bit/pixel (12 bit/component)”, the video signal is
transmitted using a higher clock frequency, which may cause noise if a cable with a bad quality or a long
cable is connected. In such a case, the noise may be removed by setting the color to
“24 bit/pixel (8 bit/component)”
・
For 4K format vertical synchronous frequency at 50/59.94/60 Hz (YCbCr 4: 4: 4),
“24 bit/pixel (8 bit/component)” is selected automatically regardless of the setting of this menu.
8.7.3 Audio format
Menu EDID
→
AUDIO FORMAT
Setting value [Table 8.12] Audio format
Communication Command
@GAF / @SAF Audio format
You can set the audio format and maximum sampling frequency to be output from a source device.
This menu is enabled if you select a resolution other than “EXTERNAL” or “Copied EDID” in
“ 8.7.1 EDID resolution ”.
[Table 8.12] Audio format
Audio format Max. sampling frequency (kHz) Default
PCM 32/44.1/48/88.2/96/176.4/192 48
Dolby Digital OFF/32/44.1/48 OFF
AAC OFF/32/44.1/48/88.2/96 OFF
Dolby OFF/32/44.1/48 OFF
DTS OFF/32/44.1/48/96 OFF
DTS-HD OFF/44.1/48/88.2/96/176.4/192 OFF
Dolby TrueHD OFF/44.1/48/88.2/96/176.4/192 OFF
Notes:
・
LC monitors do not support some audio formats. Select an audio format and sampling frequency
supported by the device.
・
If compressed audio (Dolby Digital and DTS) is input, analog audio is not output. You can check the input
audio type in “ 8.12.1 Input signal status ”.