IDK IMP-400UHD User Manual Download

Page: 18 / 99

IMP-400UHD User Guide

6.3 Cabling

When connecting the

IMP

to external devices, please observe the following precautions.

・

Read manuals for the external devices.

・

Before you connecting cables to the IMP or an external device, dissipate static electricity by touching

grounded metal such as racks before handling signal cables. Failure to observe this precaution may

result in ESD (electrostatic discharge) damage.

・

Power all units off before connecting cables.

・

Be sure to fully seat all plugs and connections and dress cables to reduce stress on connectors.

・

Secure HDMI cables using cable clamps to prevent connectors from being accidently pulled out of

ports.

Fixing HDMI cable using cable clamp

Removing HDMI cable and cable clamp

①

②

③

Pull out while pressing

④

②

④

⑤

①

③

[Fig. 6.1] Attaching a cable clamp

Summary of Contents for IMP-400UHD




































































































Search results

Summary of Contents for IMP-400UHD

Reviews:

Related manuals for IMP-400UHD

Brands by name

Popular brands

IDK IMP-400UHD, User Manual

Search results

Summary of Contents for IMP-400UHD

Reviews:

Related manuals for IMP-400UHD

Brands by name

Popular brands