IMP-400UHD Command Guide
7
2.1.3 Setting up RS-232C communication
Follow the procedure below to set RS-232C communication between the IMP-400UHD and control devices.
(1) Connect the IMP-400UHD and the control device via an
appropriate cable.
(2) Set the RS-232C communication as follows:
・
RS-232C communication: Baud rate, data bit length, parity check, and stop bit
【
Reference: User
’s Guide
】
(3) For the control device, set the same values in the same way as RS-232C communication (baud rate, data
bit length, parity check, and stop bit) in step (2) above.
(4) Send a communication command from the control device to the IMP-400UHD in order to check the control
status of the IMP-400UHD.
Step (3)
Laptop
Step (2)
Step (1)
RS-232C cable
Step (4)
Communication
command
(Control command)
[Figure 2.2] RS-232C communication
■
RS-232C communication operation example
Laptop
RS-232C cable
Controlling IMP-400UHD via
communication command
[Figure 2.3] Operation example: RS-232C communication