IDK IMP-400UHD, Command Reference Manual, Page: 12 / 40

IMP-400UHD Command Guide
12
3.2 Command list
■
Error status
Command Feature Page
@ERR Error status 14
■
Input channel setting
Command Feature Page
@GSW / @SSW Input channel 14
@GCP / @IOS Input channel switching (For the previous model) 15
■
Input setting
Command Feature Page
@GDT / @SDT No-signal-input monitoring 15
@GHE / @SHE HDCP input enabled/disabled 16
■
Switching setting
Command Feature Page
@GAU / @SAU Priority of input channel automatic switching (OFF to ON) 16
@GOF / @SOF Priority of input channel automatic switching 17
@GMT / @SMT Masking time after automatic switching of input channel 17
@GST / @SST Sequence switching mode 18
@GSQ / @SSQ Target channel for sequence switching mode 18
@GIT / @SIT Switching interval for sequence switching mode 19
@GSD / @SSD Input detection 19
@GSC / @SSC Starting channel of sequence switching mode 20
■
Output setting
Command Feature Page
@GDM / @SDM Output mode 21
@GCO / @SCO Sink device EDID check 21
@HAU HDCP re-encryption 22
■
Audio setting
Command Feature Page
@GAM / @SAM Audio output mute 22
■
Contact input
Command Feature Page
@GFP / @SFP Chattering reduction time of contact input 23