IDK IMP-400UHD, Command Reference Manual, Page: 19 / 40

IMP-400UHD Command Guide
19
@GIT / @SIT Switching interval for sequence switching mode
Getting Command @GIT
Response @GIT, time
Setting Command @SIT, time
Response @SIT, time
Parameter time: Switching interval
10000 = 10 to 30000 = 30 sec.
[Default] 10 sec.
Getting
example
Command
Response
@GIT
@GIT,20000
Description Getting set switching interval.
20 sec.
Setting
example
Command
Response
@SIT,15000
@SIT,15000
Description Setting the switching interval to 15 sec.
Remarks
－
@GSD / @SSD Input detection
Getting Command @GSD
Response @GSD, detect
Setting Command @SSD, detect
Response @SSD, detect
Parameter detect: Channels that is detected will be switched in sequence switching mode.
0 = All input channels will be switched.
1 = Only channels that is detected will be switched.
[Default] Only channels that is detected will be switched.
Getting
example
Command
Response
@GSD
@GSD,0
Description Getting the setting.
All input channels will be switched in sequence switching mode..
Setting
example
Command
Response
@SSD,1
@SSD,1
Description Only channels that is detected will be switched in sequence switching mode..
Remarks
－