IDK IMP-400UHD, Command Reference Manual, Page: 15 / 40

IMP-400UHD Command Guide
15
@GCP / @IOS Input channel switching (For the previous model)
Getting Command @GCP
Response @GCP, input
Setting Command @IOS, input
Response @IOS, input
Parameter input: Input channel
0 = OFF, 1 = IN1 to 4 = IN4
[Default] OFF
Getting
example
Command
Response
@GCP
@GCP,2
Description Getting the input channel that is assigned to OUT.
IN2
Setting
example
Command
Response
@IOS,1
@IOS,1
Description Setting OUT
’s input channel to IN1.
Remarks
－
3.3.3 Input setting
@GDT / @SDT No-signal-input monitoring
Getting Command @GDT
Response @GDT, time_1, time_2, time_3, time_4
Setting Command @SDT, ch_1, time_1 (, ch_2, time_2
･･･
)
Response @SDT, ch_1, time_1 (, ch_2, time_2
･･･
)
Parameter time_1-4: No-signal-input monitoring
0 = OFF, 2000 = 2 sec. to 15000 = 15 sec.
[Default] 10000 = 10 sec.
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits,
these values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900 ms.)
ch_1-4: Input channel
0 = All inputs, 1 = IN1 to 4 = IN4
Getting
example
Command
Response
@GDT
@GDT,6000,10000,10000,4000
Description Getting the set monitoring time.
IN1: 6000 ms. (6 sec.), IN2 and IN3: 10000 ms. (10 sec.), IN4: 4000 ms. (4
sec.)
Setting
example
Command
Response
@SDT,3,6000
@SDT,3,6000
Description Setting the monitoring time of IN3 to 6000 ms. (6 sec.).
Remarks
－