IDK HDC-RH221UHD, Command Reference Manual

Page: 14 / 63

HDC-UHD Series Command Guide
14
3.2 Command list
■
Error status
Command Function Page
@ERR Error status 16
■
Switching channel
Command Function Page
@GSW / @SSW Switching channels 17
@GOE / @SOE Applying @SOO setting 17
@GOF / @SOF Automatic input channel switching 18
@GMT / @SMT Ignoring duration after automatic switching 18
■
Setting input
Command Function Page
@GDT / @SDT No-signal input monitoring 19
@GHE / @SHE HDCP input enabled/disabled 19
@GIA / @SIA HDBaseT input long reach mode 20
■
Setting output
Command Function Page
@GDM / @SDM Output format 21
@GHM / @SHM Sink device EDID check 22
@GMK / @SMK Hot plug ignoring duration 22
@GOA / @SOA HDBaseT output long reach mode 23
@GDN / @SDN Downconversion output 23
@GOO/ @SOO Presence of output signal for when signal is input 24
@GDP / @SDP Presence of output signal for when no signal is input 24
■
Setting audio
Command Function Page
@GAW / @SAW Audio waiting duration 25
@GUC / @SUC Outputting audio 25
■
Setting EDID
Command Function Page
@GED / @SED Resolution 26
@RME Copying EDID 27
@GEC / @SEC External EDID 27
@GDI / @SDI Deep Color 28
@GSP / @SSP Speaker configuration 29
@GAF / @SAF Audio format 30
@GHZ / @SHZ Input video frequency 31