IDK HDC-RH221UHD, Command Reference Manual

Page: 22 / 63

HDC-UHD Series Command Guide
22
@GHM / @SHM Sink device EDID check
Getting Command @GHM
Response @GHM, mode_1,
･･･
, mode_5
Setting Command @SHM, out_1, mode_1 (, out_2, mode_2
･･･
)
Response @SHM, out_1, mode_1 (, out_2, mode_2
･･･
)
Parameter mode_1-5: Sink device EDID check method
0 = In case of EDID load error, the sink device is treated as a DVI device
[Default],
1 = In case of EDID load error, the sink device is treated as a HDMI device
without SCDC,
2 = Always treats sink device as a HDMI device without SCDC,
3 = In case of EDID load error, the sink device is treated as a HDMI device
with SCDC,
4 = Always treats sink device as a HDMI device with SCDC
out_1-5: Output channel
0 = All outputs, 1 to 5 = OUT1 to OUT5
Getting
example Command
Response @GHM
@GHM,0,0,0,0,0
Description Getting the sink device EDID check
“0” (In case of EDID load error, the sink device is treated as a DVI device.)
Setting
example Command
Response @SHM,0,0
@SHM,0,0
Description Setting the sink device EDID check method of all output channels to “0” (In case
of EDID load error, the sink device is treated as a DVI device.)
Completed
Remarks
－
@GMK / @SMK Hot plug ignoring duration
Getting Command @GMK
Response @GMK, mask_1,
･･･
, mask_5
Setting Command @SMK, out_1, mask_1 (, out_2, mask_2
･･･
)
Response @SMK, out_1, mask_1 (, out_2, mask_2
･･･
)
Parameter mask_1-5: Hot plug ignoring duration
1 = OFF [Default], 2 to 15 = 2 sec. to 15 sec.
out_1-5: Output channel
0 = All outputs, 1 to 5 = OUT1 to OUT5
Getting
example Command
Response
@GMK
@GMK,1,1,1,1,1
Description Getting the hot plug ignoring duration
All output channels: OFF
Setting
example Command
Response
@SMK,0,1
@SMK,0,1
Description Setting the hot plug ignoring duration of all output channels to OFF
Completed
Remarks
－