IDK HDC-RH221UHD, Command Reference Manual

Page: 17 / 63

HDC-UHD Series Command Guide
17
3.3.2 Switching channel
@GSW / @SSW Switching channels
Getting Command @GSW
Response @GSW, in _1,
･･･
, in _5
Setting Command @SSW, in, out
Response @SSW, in, out
Parameter
in, in_1-5: Input channel
1 = IN1, 2 = IN2
out: Output channel
0 [Fixed]
Getting
example Command
Response
@GSW
@GSW,1,1,1,1,1
Description Getting the input channel that is assigned to the output channel
IN1
Setting
example Command
Response
@SSW,1, 0
@SSW,1, 0
Description Setting IN1 to be output
Completed
Remarks
－
@GOE / @SOE Applying @SOO setting
Getting Command @GOE
Response @GOE, mode
Setting Command @SOE, mode
Response @SOE, mode
Parameter
mode: Switching output signal mode setting
0 = Enabled, 1 = Disabled [Default]
Getting
example Command
Response
@GOE
@GOE,1
Description Getting output signal settings
Enabled
Setting
example Command
Response
@SOE,1
@SOE,1
Description Enabling switching output signal settings
Completed
Remarks This command is valid only if “ @GOO/ @SOO Presence of output signal for
when signal is input ” is set.