IDK HDC-RH221UHD, Command Reference Manual

Page: 24 / 63

HDC-UHD Series Command Guide
24
@GOO/ @SOO Presence of output signal for when signal is input
Getting Command @GOO
Response @GOO, mode_1,
･･･
, mode_5
Setting Command @SOO, out_1, mode_1 (, out_2, mode_2
･･･
)
Response @SOO, out_1, mode_1 (, out_2, mode_2
･･･
)
Parameter mode_1-5: Output format
0 = Video output ON, Audio output ON [Default],
1 = Video output OFF, Audio output OFF,
2 = Black output ON, Audio output OFF,
3 = Black output ON, Audio output ON,
4 = Video output ON, Audio output OFF
out_1-5: Output channel
0 = All outputs, 1 to 5 = OUT1 to OUT5
Getting
example Command
Response @GOO
@GOO,0,0,0,0,0
Description Getting output signal setting
All outputs: Video output ON, Audio output ON
Setting
example Command
Response @SOO,0,0
@SOO,0,0
Description Setting all output channels to “0” (Video output ON, Audio output ON)
Completed
Remarks This setting can be enabled or disabled by setting “ @GOE / @SOE Applying
@SOO setting ”.
@GDP / @SDP Presence of output signal for when no signal is input
Getting Command @GDP
Response @GDP, power_1,
･･･
, power_5
Setting Command @SDP, out_1, power_1 (, out_2, power_2
･･･
)
Response @SDP, out_1, power_1 (, out_2, power_2
･･･
)
Parameter power_1-5: Output format
0 = Not sending the presence of input signal (+5V signal ON) [Default],
1 = Sending the presence of input signal (+5V signal OFF)
out_1-5: Output channel
0 = All outputs, 1 to 5 = OUT1 to OUT5
Getting
example Command
Response
@GDP
@GDP,0,0,0,0,0
Description Getting output setting for when no input video
All outputs: “Not sending the presence of input signal”
Setting
example Command
Response @SDP,0,0
@SDP,0,0
Description Setting all output channels to be “Not sending the presence of input signal” for
when no input video.
Completed
Remarks
－