FDX-08 Command Guide
51
@GEN / @SEN
HDCP output
Function
Getting
Setting
Format
@GEN,out_ch
@SEN,out_ch,hdcp
Return value
@GEN,out_ch,hdcp
@SEN,out_ch,hdcp
@GEN,out_ch,error
Parameter
out_ch: Output channel
0 = All outputs
1 to 8 = OUTPUT1 to OUTPUT8
hdcp: HDCP output
0 = HDCP is not output until an input channel with HDCP is selected. [Default]
1 = HDCP is encrypted only if input signal is with HDCP.
error:
- 2 = Scan converter output board is not mounted.
Example
@GEN,1
@GEN,1,0
Getting the HDCP output of output
channel 1
Set to “0” (HDCP is not output until an
input channel with HDCP is selected.)
@SEN,1,1
@SEN,1,1
Setting HDCP output of output channel 1
to “0” (HDCP is not output until an input
channel with HDCP is selected.)
Completed
Remarks
Supported since firmware ver.2.xx
