FDX-08 User Guide
77
8.9.2 Saving preset memory [PRESET SAVE]
You can save the current I/O channel status (I/O channel selection, output resolution, test pattern, display
setting, contrast, and brightness) into the preset memory.
Menu
PRESET MEMORY → PRESET SAVE
Setting value
01 to 32 : The number of preset memory1 to 32
[C] : Settings will be kept
[D] : Settings will be overwritten
[xxxxxxxxxx] : Preset memory name (Up to 10 characters in ASCII)
If selecting a memory number that is set to “---” (not control) in “
8.9.3 Editing preset memory [PRESET
”, you can select a writing method: “C” of “D”.
【
See: 8.9.3 Editing preset memory [PRESET EDIT]
Output channel 1 = Input channel 1
Output channel 2 = Input channel 2
Output channel 3 = Input channel 3
Output channel 4 = Input channel 4
Output channel 7 = Input channel 7
Output channel 8 = Input channel 8
Current I/O channel status
Output channel 1 = Input channel 3
Output channel 2 = Not control
Output channel 3 = Input channel 1
Output channel 4 = Not control
Output channel 7 = Input channel 5
Output channel 8 = Not control
Current settings of preset memory 1
Save
Output channel 1 = Input channel 1
Output channel 2 = Not control
Output channel 3 = Input channel 3
Output channel 4 = Not control
Output channel 7 = Input channel 7
Output channel 8 = Not control
Settings of preset memory 1
when
“
[C]
”
is selected.
Settings of preset memory 1
when
“
[D]
”
is selected.
Output channel 1 = Input channel 1
Output channel 2 = Input channel 2
Output channel 3 = Input channel 3
Output channel 4 = Input channel 4
Output channel 7 = Input channel 7
Output channel 8 = Input channel 8
[Fig. 8.10] Saving preset memory
Notes:
・
Press the SET key to apply the setting.
・
Do not power off the FDX while “Saving” is displayed, otherwise the setting information may be lost.
