IDK FDX-08, User Manual

Page: 60 / 102

FDX-08 User Guide
60
8.7.1 EDID resolution [EDID DATA]
You can set the EDID to be sent to the source device
In order to use values “05” to “24” which are built-in EDID, set the maximum resolution supported by the sink
device.
Menu
EDID → EDID DATA
Setting for
Each input connector (IN1 to IN8)
Setting value
[Table 8.1] Maximum resolution of EDID
(RB):
Reduced Blanking
【
See: 8.7.2 Copying EDID [EDID SAVE]
】
【
See: 8.7.3 EDID loading output channel [EDID EXTERNAL CH]
】
【
See: 8.7.13 WXGA [EDID WXGA SELECT]
】
Setting
value
Maximum resolution
Pixels Standard Remarks
00 EXTERNAL
(External EDID)
－ －
If no acquired data, the default is 05.
01 Copied EDID1
－ －
If no acquired data, the default is 05.
02 Copied EDID2
－ －
If no acquired data, the default is 05.
03
Copied EDID3
－ －
If no acquired data, the default is 05.
04 Copied EDID4
－ －
If no acquired data, the default is 05.
05 1080p (59.94/60) 1920×1080 HDTV Default
06 720p 1280×720
07 1080i 1920×1080
08 1080p (24/25/30/50) 1920×1080
09 SVGA 800×600 VESA
10
XGA
1024×768
11
VESA720
1280×720 CVT For DVI device input
12 WXGA 1280×768 VESA
13 WXGA 1280×800 MAC supported
14 Quad-VGA 1280×960
15 SXGA 1280×1024
16 WXGA 1360×768,
1366×768
The number of pixels can be set in
“ 8.7.13 WXGA [EDID WXGA
SELECT] ”.
17 SXGA+ 1400×1050
18 WXGA+ 1440×900
19 WXGA++ 1600×900 (RB)
20 UXGA 1600×1200
21 WSXGA 1680×1050
22 VESA1080 1920×1080 CVT (RB), For DVI device input
23 WUXGA 1920×1200 VESA (RB)
24 QWXGA 2048×1152 (RB)