FDX-08 User Guide
38
8.2.3 HDCP input enabled/disabled [INPUT HDCP]
Some source devices negotiate with the connected device to determine if it supports HDCP encryption.
After this negotiation, the source device decides whether they encrypt HDCP signal or not. This process takes
place with some source device, even if the content being presented is not copyright protected. The FDX is
HDCP compliant, if it is connected to a display device that does not support HDCP, video may not be
displayed. Under these circumstances and if the content is not protected, the problem can be solved by
setting this menu to “DISABLE.”
HDCP-compliant PC
HDCP-non-compliant sink device
HDCP output ON
Video cannot be displayed
HDCP-compliant/non-compliant sink device
Only video without
copyright protection can be
displayed
HDCP output OFF
HDCP-compliant display device
Video can be displayed
“
ENABLE
”
“
DISABLE
”
POWER
DIGITAL MATRIX SWITCHER
INPUT SELECT
1
2
3
4
5
6
ALL
7
8
OUTPUT SELECT
FDX-08
1
2
3
4
5
6
OFF
7
8
V&A
VIDEO
AUDIO
SWITCHING MODE
MENU/SET
ESC
SELECT MODE
OUTPUT
INPUT
PRESET
OUTPUT
INPUT
LOAD
POWER
DIGITAL MATRIX SWITCHER
INPUT SELECT
1
2
3
4
5
6
ALL
7
8
OUTPUT SELECT
FDX-08
1
2
3
4
5
6
OFF
7
8
V&A
VIDEO
AUDIO
SWITCHING MODE
MENU/SET
ESC
SELECT MODE
OUTPUT
INPUT
PRESET
OUTPUT
INPUT
LOAD
[Fig. 8.3] HDCP-compliant and HDCP-non compliant sink device
Menu
INPUT SETTING → INPUT HDCP
Setting for
Each input connector (IN1 to IN8, ALL)
Setting value
ENABLE : Supports HDCP [Default]
DISABLE : Not support HDCP
Notes:
・
In order to display contents whose copyright is protected, set this menu to “ENABLE”.
・
Only channels of input board can be selected in this menu.
Channels in which an SDI input board cannot be selected.
