COS-100HD-B User
’s Guide
50
7.6.7 [ C13 ] RS-232C communication mode
You can set the RS-232C communication mode to control the receiver and communicate with the transmitter.
Setting values
00 : Transmission mode
[Default]
01 : Setting mode
7.6.8 [ C14 ] RS-232C communication: Baud rate
You can set the data bit length for RS-232C communication between the receiver and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.6.7 [ C13 ] RS-232C (P.50)
】
Setting values
48 : 4800 [bps]
96 : 9600 [bps]
[Default]
192 : 19200 [bps]
384 : 38400 [bps]
7.6.9 [ C15 ] RS-232C communication: Data bit length
You can set the data bit length for RS-232C communication between the receiver and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.6.7 [ C13 ] RS-232C (P.50)
】
Setting values
07:7 [bit]
08:8 [bit]
[Default]
7.6.10 [ C16 ] RS-232C communication: Parity check
You can set the parity check for RS-232C communication between the receiver and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.6.7 [ C13 ] RS-232C (P.50)
】
Setting values
non : None [Default]
odd : Odd
En : Even
7.6.11 [ C17 ] RS-232C communication: Stop bit
You can set the stop bit for RS-232C communication between the transmitter and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.6.7 [ C13 ] RS-232C (P.50)
】
Setting values
