COS-100HD-B User
’s Guide
39
7.3.5 [ C13 ] RS-232C communication mode
You can set the RS-232C communication mode to control the transmitter and communicate with the receiver.
Setting values
00 : Transmission mode
[Default]
01 : Setting mode
7.3.6 [ C14 ] RS-232C communication: Baud rate
You can set the baud rate for RS-232C communication between the transmitter and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.3.5 [ C13 ] RS-232C communication mode (P.39)
】
Setting values
48 : 4800 [bps]
96 : 9600 [bps]
[Default]
192 : 19200 [bps]
384 : 38400 [bps]
7.3.7 [ C15 ] RS-232C communication: Data bit length
You can set the data bit length for RS-232C communication between the transmitter and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.3.5 [ C13 ] RS-232C communication mode (P.39)
】
Setting values
07 : 7 [bit]
08 : 8 [bit]
[Default]
7.3.8 [ C16 ] RS-232C communication: Parity check
You can set the parity check for RS-232C communication between the transmitter and control device.
This setting will be applied for both modes (
“00” and “01”) set in [ C13 ].
【
See:7.3.5 [ C13 ] RS-232C communication mode (P.39)
】
Setting values
Non : None [Default]
odd : Odd
En : Even
