Part 1 – Introduction
13
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective
installation
manuals
.
Product color and design may vary depending on the
model.
•
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or
ceiling is not strong enough to support its weight.
•
Install the camera in a shaded area. If the camera is
installed in direct sunlight, it may affect adversely.
Indoor
1
Screw the indoor bracket to the wall or ceiling by
using the wall/ceiling mounting screws provided
with the camera.
2
Make a cable hole in the wall or ceiling.
3
Hook the safety wire of the bracket on the safety
wire ring of the camera body.
4
Connect external devices, the network cable, and
the power adapter.
5
Connect the camera body to the indoor bracket.
Fix the install screws of the camera body up to the
install screw holes of the bracket, and then turn the
camera body by 25° in the clockwise direction.
6
Fasten the camera body to the bracket by tightening
the M4 screw provided with the camera to the to the
M4 screw hole of the bracket.
7
Supply the power.
