Part 1 – Introduction
8
Overview
Product color and design may vary depending on the model.
Indoor and Outdoor
Body
1
2
4
3
1
Lens
2
SD Memory Card Slot
3
Dome Cover
4
Waterproof Sealing (black rubber)
•
Lens
AF zoom lens is mounted.
•
SD Memory Card Slot
Used to insert a microSD memory card into
the camera. (An SLC (Single Level Cell) or MLC
(Multi Level Cell) card by SanDisk or Transcend is
recommended) Remove the dome cover in order
to remove or insert the SD memory card. Make sure
that the waterproof sealing is joined properly when
reconnecting the dome cover; otherwise, the IP66
level is not guaranteed.
•
To remove/insert the SD memory card or
perform the factory reset, make sure that
the waterproof sealing is screwed to the
dome cover tightly when reconnecting the
dome cover. Otherwise, the IP66 level is not
guaranteed. For more information, contact your
product retailer.
•
Do not remove the SD memory card while the
system is in operation. Removing the card while
the system is in operation can cause the system
to malfunction and/or corrupt data stored on
the SD memory card.
•
An SD memory card is a consumable product
with a finite service life. Prolonged use will
damage the card's memory sectors and result
in data loss or memory card failure. Test the SD
memory card regularly and replace it whenever
necessary.
•
Dome Cover
Protects the inner parts of camera.
•
Waterproof Sealing
Resists the ingress of water.
