Part 1 – Introduction
9
Body – Bottom Side View
5
6
8
7
5
Cable
6
Safety Wire Ring
7
Install Screw
8
M3 Screw Hole
•
Cable
Refer to the
.
•
Safety Wire Ring
Secures the body to the bracket or the bracket to the
body. Prevents the body or bracket from falling on to
the floor when detached from the body and bracket.
(frame ground) is marked beside the safety wire
screw hole of the indoor bracket. When fastening
the camera body to the indoor bracket, ground the
camera by using the grounding clip provided with
the camera. It is recommended that you use the
camera after grounding it.
•
Install Screw
When installing an indoor camera, it secures the
body to the indoor bracket.
•
M3 Screw Hole
When installing an outdoor camera, use the provided
M3 screws to secure the sun shield on to the camera
body. (frame ground) is marked beside the M3
screw hole of the camera body. When fastening the
camera body to the indoor bracket, ground the
camera by using the grounding clip provided with
the camera. It is recommended that you use the
camera after grounding it.
A sealing label is attached beside a dome cover
screw in the bottom of the camera body for quality
assurance of the product. (If the sealing label is
removed to insert a microSD memory card, make sure
that the waterproof sealing is joined properly.)
Indoor Bracket
1
2
3
4
Outdoor Bracket
5
6
3
The outdoor bracket is purchased separately. Ask your
dealer or distributor about purchasing it.
