Idis DC-S1163F, Quick Manual

Page: 7 / 12

7 Network Camera
In case that a universal nut is not attached to a pipe
Connect the sun shield to the outdoor bracket as
follows:
1
Remove the install screw from the camera body.
2
Use the provided M3 screws to secure the sun
shield on to the camera body.
3
Assemble the outdoor bracket to the pipe by
turning the outdoor bracket.
4
Hook the safety wire of the outdoor bracket on the
safety wire ring of the camera body.
5
Connect the cable from the camera to the pipe.
6
Screw the sun shield to the outdoor bracket by
using the M5 screws provided with the camera.
7
Connect external devices, the network cable, and
the power adapter.
8
Supply the power.
Flushed
The camera is mounted in the housing.
1
Remove the ceiling tile from the ceiling. Draw
circle whose diameter is 7.87" (200 mm) on the tile.
Cut the circle out of the ceiling tile.
2
Connect external devices, the network cable, and
the power adapter.
3
Turn the housing dome cover counterclockwise
to remove the housing dome cover from the
housing can.
4
Insert the housing into the ceiling and turn the
screws of three clamps clockwise. The clamps are
laid over the ceiling tile and the housing is held in
the ceiling.
5
Connect the housing dome cover to the housing
can and turn it clockwise to secure the dome cover
to the housing.
6
Supply the power
The ceiling tile cannot be thicker than 1.3”
(35mm).
•
DirectIP NVR makes it easy to use cameras without extra network configurations.
Each camera can be controlled via the DirectIP™ NVR setup menu, without any PC.
- For detailed camera settings, please see the camera setting pages of DirectIP™ NVR manual.
• To use your camera with non-DirectIP system (e.g. other NVR or VMS), refer to the camera
manual and it can be downloaded from our website: www.idisglobal.com.
English