Idis DC-S1163F, Quick Manual

Page: 6 / 12

6 Quick Guide
Indoor
1
Screw the indoor bracket to the wall or ceiling by
using the wall/ceiling mounting screws provided with
the camera.
2
Make a cable hole in the wall or ceiling.
3
Hook the safety wire of the bracket on the safety wire
ring of the camera body.
4
Connect external devices, the network cable, and the
power adapter.
5
Connect the camera body to the indoor bracket. Fix
the install screws of the camera body up to the install
screw holes of the bracket and then turn the camera
body by 25° in the clockwise direction.
6
Secure the camera body on to the bracket by
tightening the M4 screw provided with the camera to
the M4 screw hole of the bracket.
7
Supply the power.
Outdoor
The outdoor bracket and sun shield are purchased
separately. Ask your dealer or distributor about
purchasing it.
In case that a universal nut is attached to a pipe
Connect the sun shield and outdoor bracket first, then
connect it to the pipe as follows:
1
Remove the install screw from the camera body.
2
Use the provided M3 screws to secure the sun
shield on to the camera body.
3
Hook the safety wire of the outdoor bracket on
the safety wire ring of the camera body.
4
Screw the outdoor bracket to the sun shield by
using the M5 screws provided with the camera.
5
Connect the cable from the camera to the pipe.
6
Turn the universal nut to connect the camera to
the pipe.
7
Connect external devices, the network cable, and
the power adapter.
8
Supply
the power.
Camera Installation
English