Part 1 – Introduction
15
Block the cable access hole for waterproofing
by using the enclosed cable access hole
rubber when routing the thin or several wires.
Waterproofing sealing is required by using
silicone etc. after blocking the cable access hole.
Ask your retailer for details.
3
Assemble the cable rubber to the bottom cover.
4
Attach the enclosed desiccant in the bottom to
prevent moisture.
Desiccant
5
Connect the safety wire with the bracket. Fasten the
screws for the bottom cover clockwise using the
allen wrench provided with the camera.
6
Connect external devices, the network cable, and
the power adapter.
7
Adjust the angle. For more information, refer to the
.
DC-D3533RX
1
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Cable
Protect
connector
2
Assemble the cable rubber to the bottom cover.
