manualshive.com logo in svg

Idis DC-D1011, Operation Manual

Share
Download
Idis DC-D1011 Operation Manual Download Page 42

Part 1 - Remote Setup

42

 

•

Alarm In Bad

: Select to check the alarm in status and 

then set up a schedule. 

 TYPE 1 

 -

Send Email

: Select to send out an email if no 

change is detected in the alarm in status.

 -

Remote Callback

: Select this option to send 

a message to a remote system if no change is 
detected in the alarm in status and then select 
which system to send the message to.

 

•

Disk In/Out

: Select to check if the SD card has been 

inserted/removed. 

 TYPE 1 

 -

Send Email

: Select to send out an email when the 

SD card is inserted/removed.

 -

Remote Callback

: Select this option to send a 

message to a remote system when the SD card is 
inserted/removed and then select which system to 
send the message to.

 

•

Email

 and 

Remote Callback

 settings under 

Event 

Action

 must be configured correctly in order to 

send out emails and messages.

 

•

Remote Callback

 is not supported on IDIS Web.

 

•

The camera must be registered to the remote 
system in order to use the 

Remote Callback

 feature.

Summary of Contents for DC-D1011























































Reviews:

No comments

Brands by name

Popular brands

Load more brands