Part 1 - Remote Setup
24
•
Compression
: Choose the streaming compression
method.
•
Resolution
: Choose a resolution setting for video
streaming. The current stream resolution cannot be
higher than the higher stream resolution.
•
Quality
: Choose a quality setting for video streaming.
•
Bitrate Control
: Choose a bitrate control mode for
H.264 compression.
-
CBR (Fixed Bitrate)
: Maintains the current bitrate
regardless of motion change in the video.
-
VBR (Variable Bitrate)
: Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
•
Frame Rate
: Choose a frame rate setting for video
streaming. The fame rate of the current stream cannot
be higher than the fame rate of the higher stream if
those stream resolutions are same.
•
Default Record Stream
: Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD card recording feature
has been enabled. For more information, refer to the
Settings on page 33
.
SD card recording is supported by
TYPE 1
models
only.
•
Multi-View Streaming
: Designate a specific area of
the screen and stream images from that area only.
(not applicable to the primary stream) This function
will not be supported when the resolution of the
primary stream is set to 2304x1296 (
DC-D1323R / DC-
D1323WR / DC-D1323WHR
). Click
Setup
to designate
a streaming area.
Select
On
and then specify the streaming area’s
resolution.
-
Resolution Limit
: Indicates the maximum
resolution that can be set for the streaming area.
-
Resolution
: Designate a streaming area.
Designated area is marked in red on the screen. You
can adjust the resolution of the area or reposition
the area by dragging and dropping using the
mouse.
-
Current Resolution
: Displays the resolution of the
designated streaming area.
If multiple users are connected to the camera, the
increase in bandwidth use can lower the frame rate.
