22
2-7
-
-
-
Undefined
[Details]
When one paper sensor is enabled with this command, printing is stopped only when
the corresponding paper is selected for printing.
When a paper-end is detected by the paper roll sensor, the printer goes offline after
printing stops.
When either bit 0 or 1 is on, the printer selects the paper roll near-end sensor for the
paper sensor to stop printing.
[
Default
]
n
= 0
36. ESC c 5 n
[Name]
Enable/disable panel buttons
[Format]
ASCII
ESC
c
5
n
Hex
1B
63
35
n
Decimal
27
99
53
n
[Range]
0
≤
n
≤
255
[Description]
Enables or disables the panel buttons.
•
When the LSB of
n
is 0, the panel buttons are enabled.
•
When the LSB of
n
is 1, the panel buttons are disabled.
[Details]
•
Only the lowest bit of n is valid.
•
When the panel buttons are disabled, none of them are usable when the printer
cover is closed.
•
In this printer, the panel buttons are the FEED button.
•
In the macro ready mode, the FEED button are enabled regardless of the
settings of this command; however, the paper cannot be fed by using these
buttons.
[Default]
n
= 0
37. ESC d n
[Name]
Print and feed
n
lines
[Format]
ASCII
ESC
d
n
Hex
1B
64
n
Decimal
27
100
n
[Range]
0
≤
n
≤
255
[Description]
Prints the data in the print buffer and feeds n lines.
[Details]
•
This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
•
The maximum paper feed amount is 1016 mm (40 inches). If the paper feed
amount (
nx
line spacing) of more than 1016 mm (40 inches) is specified, the
printer feeds the paper only 1016 mm (40 inches).
[Reference]
ESC 2
,
ESC 3