iDiPOS TP-80, Program Manual, Page: 2 / 54

1
4. FF
[Name] Print and return to standard normal mode in page mode
[Format] ASCII FF
Hex 0C
Decimal 12
[Description] Prints the data in the print buffer collectively and returns to normal mode.
[Details]

The buffer data is deleted after being printed.

The printing area set by ESC W is reset to the default setting.

The printer does not execute paper cutting.

This command sets the print position to the beginning of the line.

This command is enabled only in page mode.
[Reference] ESC FF , ESC L , ESC S
5. CAN
[Name] Cancel print data in page mode
[Format] ASCII CAN
Hex 18
Decimal 24
[Description] In page mode, deletes all the print data in the current printable area.
[Details]

This command is enabled only in page mode.

If data that existed in the previously specified printing area also exists in the
currently specified printing area, it is deleted.
[Reference] ESC L , ESC W
6. DLE EOT
n
[Name] Real-time status transmission
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 1

n

4
[Description] Transmits the selected printer status specified by n in real-time, according to the
following parameters:
n = 1: Transmit printer status
n = 2: Transmit off-line status
n = 3: Transmit error status
n = 4: Transmit paper roll sensor status
[Details]

The status is transmitted whenever the data sequence.

This command should not be used among the command that consists of 2 or
more bytes.

Even though the printer is not selected using ESC = (select peripheral device),
this command is effective.

The printer transmits the current status. Each status is represented by onebyte
data.