5
Chapter 3: Usage Instructions
Installing the SIM card, memory card and battery
1. Swing open the main battery cover clip by 90 degrees, you can then remove the battery
cover
2. Insert the SIM card or microSD/TF card into their corresponding slots in the battery
compartment
3. Insert the battery, then cover it with the battery cover clip
Note: when you first use the battery, the battery will only be around 50% charged
You can recharge through the power supply that comes with your adapter or charger (sold
separately) for charging. Charging for the first time should take more than 12 hours.
Turning on/turning off the device
Press and hold the power key to turn on the terminal. Release the power key when
the system LED will light up, and the Windows CE screen appears.
When you are finished using the device, you can choose to either turn it off or let it
go into sleep mode to conserve battery power.
1. Click on start in main page
→
hangs, the device will enter sleep mode.
During sleep mode, some of the equipment components continue to remain powered,
and stored data will not be saved. You may press the power key anytime to wake up the
device.
2. To power down, press and hold the power button for 3 seconds or more, a prompt box
will pop up on the screen:
