Operator Manual
Aspect ISO-Drive
L100-3265 Rev. A
16
9.
STANDARD ACCESSORIES
9.1.
Patient Mattress Pad for Tabletop.
The Patient Mattress Pad is held in place by hook and loop fasteners. To remove the pad,
simply pull pad up gently to remove. Replacement pads are supplied with new self-
adhesive fasteners installed and new adhesive backed mating pieces for the tabletop. Peel
off old fasteners from Table Top. Peel off the protective paper and carefully put new pad
into position. Apply pressure to complete installation.
Note: Pad complies with California Technical Bulletin 117.
9.2.
Head Positioning Pads.
Four Head Positioning Pads are provided with the ISO-Drive’s unique tapered top, these
are held in place by hook and loop fasteners. To remove the pad, simply pull pad up
gently to remove. Replacement pads are supplied with new self-adhesive fasteners
installed and new adhesive backed mating pieces for the tabletop, when replacing Head
Positioners peel off old fasteners from Table Top. Peel off the protective paper and
carefully put new pad into position. Apply pressure to complete installation. When
changing Head Positioners, it isn’t necessary to replace the mating fastener on the tabletop
•
1” Thick positioner with facial opening
•
Full height positioner with facial opening
•
Wedge positioner with facial opening
•
Full height positioner without facial opening
Note: Positioning pads comply with California Technical Bulletin 117.
