Operator Manual
Aspect ISO-Drive
L100-3265 Rev. A
15
8.2.
TABLE MOTION CONTROLS
•
When using the Handset Control shown above, each button must be held down to
get continuous motion of the tabletop. Motions will stop as soon as the button is
released.
•
To store the current position of the table to a memory location press “Store
Memory Position” then the desired recall button; 1, 2, or 3.
•
To recall a memory position, hold the desired recall button continuously until the
table motion stops.
WARNING!
The Handset Control is always active when
connected to a powered-up table.
