Installation and Maintenance Guide for IDI 1000F Series Suspension System for use
with OTC Adapter
D000-571 REV E
MAY-2018
Image Diagnostics, Inc.
Page
11
4.
If monitor rotation resistance is inadequate and it fails to stay in the desired
position, tighten bolt (item 22).
NOTE TO INSTALLER:
Ground stud (item 27) has been provided to
properly ground monitors as a group. Terminal strip (item 31) has been
provided for distribution of line voltage to each monitor. Cut and strip each
monitor power cord to fit.
WARNING!
Remove plastic cover and remove
block of wood between gantry core
and arm. Failure to do so may result
in serious injury to user and damage
to equipment.
SET ROTATIONAL LIMITS
(Refer to Monitor Mount Assembly Drawing)
If desired, the stop pin (item 4) can be relocated to another of its four possible
mounting locations. Remove rotational cover (item 35) to access the stop pin
mounting screw (item 52).
FOUR POSSIBLE
STOP PIN
MOUNTING POSITIONS