background image

Page 24  

0901048 Rev. C 

Disclaimer

 

Knight LLC does not accept responsibility for the mishandling, misuse, or non-performance of the described items when used for 
purposes other than those specified in the instructions. For hazardous materials information consult label, MSDS, or Knight LLC. 
Knight products are not for use in potentially explosive environments. Any use of our equipment in such an environment is at the risk 
of the user, Knight does not accept any liability in such circumstances. 

 

Warranty

 

 

All Knight controls and pump systems are warranted against defects in material and workmanship for a period of ONE year. All 
electronic control boards have a TWO year warranty. Warranty applies only to the replacement or repair of such parts when returned 
to factory with a Knight Return Authorization (KRA) number, freight prepaid, and found to be defective upon factory authorized 
inspection. Bearings and pump seals or rubber and synthetic rubber parts such as “O” rings, diaphragms, squeeze tubing, and gaskets 
are considered expendable and are not covered under warranty. Warranty does not cover liability resulting from performance of this 
equipment nor the labor to replace this equipment. Product abuse or misuse voids warranty. 

 

Footnote

 

The information and specifications included in this publication were in effect at the time of approval for printing. Knight LLC reserves 
the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation 
whatsoever. 

 

Knight Headquarters 
20531 Crescent Bay Dr. 
Lake Forest, California 
 
USA 

Tel: 949.595.4800 
Fax: 949.595.4801 

 

 
 

 
USA Toll Free 

Tel: 800.854.3764 
Fax: 800.752.9518 

 

 
 

 
Knight Canada 

Tel: 905.542.2333 
Fax: 905.542.1536

 

 
 

 
Knight Europe 

Tel: 44.1323.514855 
Fax: 44.1323514828

 
 
 

 
Knight Australia 

Tel: 61.02.9352.1801 
Fax: 61.02.9352.1899 

 
 
 

 
Knight N. Asia 

Tel: 82.2.3481.6683 
Fax: 82.2.3482.5742 

 
 
 

 
Knight S. Asia 

Tel: 65.91700984 
Fax: 65.64896723 

Visit us on the web at www.knightequip.com 

Summary of Contents for Knight DoseTech DMS



























Reviews: