Page 6
0901048 Rev. C
Description of Screen
Display
1.
Power on the unit.
For about 2 seconds you will see the screen to the right.
If the system is equipped with a USB interface, the current USB version will be displayed.
2.
After about 2 seconds you will see the screen to the right.
3.
To enter the programming mode, hold down the ENTER button until the display color changes to purple.
4.
Press the UP button to start/stop priming the detergent. The detergent will fill the detergent will fill the detergent
suction tube. If the flow meter option is installed, the flow meter counts will be displayed. The detergent will then fill
the detergent discharge tube. Once there is a steady flow of detergent out of the detergent discharge tube into the
sink, press UP to stop priming.
Important:
1. Check to make sure the roller block is rotating clockwise.
2. Ensure the FLOWMETER CTS has a numerical value. The range of values will vary.
Note: If the flow meter option is installed and auto prime enabled, when the unit is primed it will use calculations form
the prime to auto prime the unit when the detergent runs out.
Press ENTER to advance to the next screen.
5.
To access the basic features in the programming mode, you will need a user pass code. To enter a user pass code,
use the SCROLL button to scroll between digits and the UP and DOWN buttons to cycle between 0-9. By default, the
pass code is set to 0000.
Press ENTER to advance to the next screen.
6.
To change the existing user pass code, use the SCROLL button to scroll between the digits and use the UP and
DOWN buttons to cycle between 0-9.
Press ENTER to advance to the next screen.
7.
To view the reports, there are two options:
1.
Data download (if USB port option is installed, data will be downloaded to USB stick on coming menu
options)
2.
On-Screen report (data will be displayed directly on LCD)
You can choose either option by pressing the SCROLL button. When complete, press ENTER to advance to the next
screen.
Programming DoseTechDMS
USB VERSION
Firmware Ver IXXX
17:05:56AM
08/15/13
LAST DOSE VOLUME
000
LEVELS A&B
025/050
ALARMS TODAY
000
PRESS UP TO START PUMP
PRIMING
PRESS UP TO START PUMP
PRIMING
PRESS SCROLL TO CHANGE
USER CODE
PRESS SCROLL TO CHANGE
USER CODE
SELECT DATA DOWNLOAD OR ON-
SCREEN REPORTS
Summary of Contents for Knight DoseTech DMS
