Idex Knight Control Guard ACCS, Instruction Manual

Page: 13 / 52

0901180 Rev: B (09/16) Page 13
Engineering Units
If using an analog sensor, you can specify what units
that the device measures (pH for example). Use ▲
and ▼ to change the letters of the engineering units,
then press ENTER.
4mA
To change the 4mA setting use the ► and ◄ keys to
move the cursor (▲) to the number you want to
change. Use the ▲ key to change the number. Once
you have reached the last number press the ► key
one more time to save and exit back to the settings
menu. Use the EXIT key to exit without saving.
20mA
To change the 20 mA setting use the ► and ◄ keys
to move the cursor (▲) to the number you want to
change. Use the ▲ key to change the number. Once
you have reached the last number press the ► key
one more time to save and exit back to the settings
menu. Use the EXIT key to exit without saving.
ANALOG 1 SETTINGS
ANALOG 1
► ENG. UNITS:
4MA=0000.000
20MA=0000..000
______________________________
▲ | ▼ |
◄ | ENTER
ENG. UNITS:
▲
______________________________
▲ | ▼ |
◄ | ENTER
ANALOG 1 SETTINGS
ANALOG 1
ENG. UNITS:
► 4 MA=0000.000
20 MA=0000..000
______________________________
▲ | ▼ |
◄ | ENTER
ANALOG 1 SETTINGS
4MA=0000.000
▲
______________________________
▲ | ▼ |
◄ | ENTER
ANALOG 1 SETTINGS
ANALOG 1
ENG. UNITS:
4 MA=0000.000
► 20 MA=0000..000
______________________________
▲ | ▼ |
◄ | ENTER
ANALOG 1 SETTINGS
20MA=0000.000
▲
______________________________
▲ | ▼ |
◄ | ENTER