Idex Knight Control Guard ACCS, Instruction Manual

Page: 23 / 52

0901180 Rev: B (09/16) Page 23
OPERATION ERROR SCREENS
Missing Calibration Error
If any of the pumps are not calibrated prior to opera-
tion you will get a “CALIBRATE PUMP” error screen
in red showing which pump is missing the calibration.
Press any key to continue. Go into the main menu
and calibrate pumps.
Flow Meter Error
The screen will show which pump has a flow meter
error. You can disable the flow meter to allow the
pump to operate in time mode while the problem is
being rectified.
Probe Error
This display indicates that one of the probes connect-
ed to the system is not recognized. Check wiring from
the probe to the main control board.
Low Level Error
When a chemical container is low (or empty) this
message will indicate which pump is affected.
Temperature Error
This display will show if the temperature is out of
range (low or high) for any chemical that temperature
monitoring is enabled.
I/O Communication Error
If the I/O board is not detected during advanced sys-
tem operation you will get an “I/O COMMUNICATION
ERROR” screen in red.
PUMP NAME
FLOW METER ERROR
PUMP NAME
CALIBRATE PUMP
PROBE ERROR
DISABLE FLOW ME-
TER?
I/O COMMUNICATION
ERROR
LOW LEVEL
TEMPERATURE